Safety Tips for Railway Construction

17 Safety Tips For Tunnel Construction

In this article, we will discuss safety tips for tunnel construction.

 

  1. Introduction  

Safety measures should be carried out in any of the construction sites. One small mistake is enough to occur an accident on the construction site. An accident can take a life of a worker on the construction site. So, to be safe while working on construction sites it is very necessary to adopt all the preventive measures that can avoid accidents on construction sites.

If any accident happens then there should be a facility of first aid as it can save the life of a person. There are a few safety tips that can help you to avoid accidents on construction sites. So, before starting a work always remember the below-mentioned safety tips for tunnel construction.

 

  2. Safety Tips For Tunnel Construction  

Here are 17 safety tips for tunnel construction sites are as follows: 

 

  1. Providing Proper Training  

You need to know all the risk factors before starting work that can make you aware of that particular situation. You should be well trained before doing any particular work. Your training should include these factors:

i. Getting safety training classes

ii. Getting full training related to types of equipment (How does it work?)

iii. Inspecting the equipment and checking their part are well functioning or not.

iv. Emergency and first-aid plans.

Safety Tips For Tunnel Construction

 

  2. Wear the Safety Equipment  

Safety equipment should be provided for all workers and also for visitors. In the place where the noise is high, earplugs should be used to protect ears from sharp sound. The respiratory equipment should be utilized to protect the nose from dust particles. Don’t forget to wear hand gloves and boots while working with concrete.

Safety Tips For Tunnel Construction

 

  3. Create Separate Work Areas  

By creating separate work areas, don’t let to enter any unauthorized person inside the work areas.

Safety Tips For Tunnel Construction

 

  4. Increase Worker and Work Site Visibility  

For making the site more visible spreading water on the ground surface wouldn’t make the air smoky. Don’t spread more water as the ground surface can be slippery. An increase in workers can reduce the load of work from workers.

Increase Worker and Work Site Visibility

 

  5. Check Electrical Appliances And Wires Daily  

The make a proper path for wire as sometimes it may be dangerous, the worker may get stuck and fell down that might occur an accident. The wire should be inspected daily, the wire where it is naked should be immediately get taped.

Check electrical appliances and wires daily

 

 

  6. Use Caution When Operating Heavy Machinery  

While working with machinery vehicles, more awareness should be shown. Here are a few things that need to be followed by an operator:

a. Utilize a seatbelt at all times

b. Apply parking brakes whenever vehicles are not in use

c. Put a block in front or behind the tires when left on an incline or declined.

d. Use a spotter when moving, unloading, and loading equipment

e. Check that mirrors and other visual aids like tail lights are attached and operational.

 

Use Caution When Operating Heavy Machinery

 

  7. Keeping a Competent Person  

A competent person is a person who watches all the worker and make sure their safety. All the possible hazards are considered by a competent person.

Keeping a Competent Person

 

  8. Aware of Surrounding  

While working you should be aware of your surroundings, what is going on in your surrounding. While crossing the road, a double cross check should be done.

Aware of Surrounding

 

  10. Always Stay Hydrated  

While working in the hot sun, usually people get faint due to lack of water in their bodies. So, the competent person should keep his to the individual worker.

Always Stay Hydrated

 

  11. Always Communicate With Each Other  

There should be a good mutual understanding between workers. There should be a discussion of work and the plan should be executed according to the decision taken.

Always Communicate With Each Other

 

  12. If in doubt, ask  

If there doubt related to work, equipment is good to ask with experienced manpower. Because they can guide you to operate or run the equipment. So, it is always good to ask whenever there is a doubt.

Aware of Surrounding

 

  13. Set Up a Proper Perimeter  

While constructing or maintaining underground railways, roadways the proper guide board should be kept. For example, while there is construction going on the underground road the road-closed signboard should be placed.

 

Safety Tips For Tunnel Construction

 

  14. Check Machines and Tools  

Before starting work, always check the machines and tools whether they need any maintenance or not. If needed then, take it out from the working area.

Check Machines and Tools

 

  15. Providing Proper Light  

Inside the tunnel, it is too dark so, proper lighting should be done to avoid an accident.

 

Providing Proper Light

 

  16. Clean Floor of Tunnel  

Always clean the floor of the tunnel and remove the sharp objects gathered from the floors.

Clean Floor of Tunnel

 

  17. Providing Proper Ventilation  

While progressing inside the tunnel, there should be a good option provided for ventilation. Many accidents cases are heard related to respiratory problems inside the tunnel. So, always provide good ventilation inside the tunnel.

Providing Proper Ventilation

These were 17 safety tips for tunnel construction which are needed to be followed by everyone working on tunnel construction.

 

Read Also: Safety Tips For building construction