Roof Vents : Types, Installation, Tools Needed & Advantages of Roof Vents

- Advertisement -
- Advertisement -
5
(1)

 

When we discuss roof vents, there are numerous types to select from. Each type includes various advantages and disadvantages; the right one will rely on the structure, climate, and budget.

 


 

 

  1. Types of Roof Vents  

The types of roof vents are as follows:

a. Gable Vents

b. Turbine Vents

c. Static Roof Vents

d. Wind Turbines

 

a. Gable Vents

Gable vents are a standard element of residential roofs that permit air to distribute inside the attic and exhaust hot air out of the building.

Gable vents are normally found close to the roof’s peak, above the attic, and can be noticed outside the house. Gable vents are available in various shapes and sizes and can also be prepared of aluminum, wood, and vinyl.

Gable vents perform different objectives, especially to assist the attic and building stay cool at the time of the summer months.

By permitting hot air to exit and cooler air to pass, gable vents assist control the temperature in the attic, which can otherwise evolve too hot and cause damage to the materials present inside.

They can also assist to control snow from accumulating on the roof and liquefying into the attic in the winter.

Gable vents also offer extra ventilation to the building, decreasing the buildup of wetness which can cause damage to the home’s structure. They also assist to decrease the possibility of condensation and mold developing inside the attic.

 

Gable Vents

 

 

b. Turbine Vents

Turbine vents commonly called roof turbines or whirlybirds, are necessary to hold proper ventilation in a structure. Turbine vents are air exhausts established on the roof of a building to ease air pass.

Turbine vents are most valuable in commercial and residential settings, as they permit to decrease energy expenses by delivering natural air ventilation. Turbine vents are constructed of a cylindrical housing with a wind turbine positioned at the top.

This turbine is planned to spin in the wind, making an updraft vent. The spinning turbine forces an expansion in air pressure inside the housing, which draws the exhaust air out of the structure via the vent.

This delivers an efficient method to exhaust air from a structure without employing fans or other systems.

 

Turbine Vents

 

c. Static Roof Vents

Static roof vents are an essential component of any roofing system. They deliver an outlet for hot air to exit from attics and other enclosed spaces, controlling heat buildup that can generate high temperatures, condensation, and other problems.

They also assist to control air circulation, minimizing moisture, and enhancing air quality. Static roof vents are usually non-motorized, depending only on the wind to push air through the vent.

This type of vent is generally constructed from metal, plastic, or composite material and is obtainable in different sizes and shapes. They can be established in many directions relying on the application’s specific requirements.

Since static roof vents do not shift, they do not deliver as considerable ventilation as a motorized fan or turbine vent. This is why they are employed in combination with other types of roof vents, such as turbine vents or intake louvers. This makes sure that air continuously flows in and out of the attic, controlling condensation and hot spots.

 

Static Roof Vents

 

 

d. Wind Turbines

Wind turbines are a famous way to produce renewable energy. They employ the power of the wind to rotate a generator and develop electricity. Wind turbines are positioned in specific locations with good wind resources, such as ridgelines and open plains.

The blades of a wind turbine are developed to catch the K.E. of the wind, which is then transformed into mechanical energy. This mechanical energy is employed to rotate a generator, making electricity. The wind turbines are joined to a power grid so that the electricity made can be employed for different uses.

Wind turbines have many benefits over other types of renewable energy. For one, they can produce electricity without ruining any fuel, unlike other types of renewable energy, such as solar energy. Also, wind turbines can deliver a higher electricity outcome than other types of renewable energy.

 

Wind Turbines

 

 


 

 

  2. Tools Needed  

The tools needed for the installation of the roof vents are as follows:

a. Tape measure

A tape measure is important when calculating and cutting the materials required for an installation. A tape measure should be employed throughout the process to make sure exactness and a precise fit.

 

b. Circular saw

A circular saw is needed for trimming the essential materials employed in the installation. It is essential to mention that the saw’s blade requires to be the right size to make sure a clean and precise cut.

 

c. Drill and Drill Bits

A drill and drill bits will be required for drilling any holes needed as part of the installation process. The size and type of drill bit required will depend on the materials being drilled.

 

d. Hammer

A hammer is needed for forcing nails into the materials. A standard claw hammer will function for this objective.

 

e. Caulk gun

A caulk gun involves sealants and other adhesive compounds. The type of caulk gun needed will rely on the adhesive employed.

 

f. Utility knife

A utility knife is employed to shorten and trim away extra materials during the period of installation.

 

g. Safety Goggles and Gloves

Safety goggles and gloves should consistently be worn when operating tools and materials.

 

 


 

 

  3. Advantages of Roof Vents  

The advantages of roof vents are as follows:

a. Controls Condensation, Mold, and Rot.

b. Improves Energy Efficiency.

c. Improves Roof’s Lifespan.

d. Decreases Indoor Temperature Extremes.

e. Control Ice Damming.

 

 


 

 

  4. Installation of Roof Vents  

The installation of roof vents is very easy, you just need to follow these steps:

a. Force a nail via your roof to keep the mark for the vent.

b. Terminate the shingles that would be impacted by the vent. Put them aside for later.

c. Dig a hole near the nail you kept the vent mark with.

d. Reinstall the lower shingles.

e. Establish the roof vent with roofing tar and nails.

 

 


 

  5. References  

1. Content Filter & Authenticity Checking Team, Dream Civil International

(Our team checks every content & detail to maintain quality.)

 


 

 

Read Also: Grasscrete

 

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

- Advertisement -
Latest Articles
Related Articles
Advertisement