Irrigation Tools List: With Images & Uses

In this article, we will discuss the irrigation tools list.

For irrigation, you need many tools which also depend upon the types of irrigation. For, sprinkle irrigation less amount of tools are needed whereas for drip irrigation you need various tools to work out.

We can check the irrigation tools list below in the table for excavating to handling tools.

  1. Irrigation Tools List  

( Note: Mobile users are requested to tilt mobile or zoom figures for the best experience. )

We have divided Irrigation Tools List into two parts that are as follows:

a. Excavating Tools

* Hand Tool

Names	Images	Uses
1. Spade		Used for digging straight-edged holes or trenches, slicing and lifting sod, and edging flower beds or lawns.
2. Shovel		Used to dig as well as to move loose.
3. Hoe		Used in gardening and horticulture to loosen soil and chop weeds.
4. Trowel		Used for digging small holes or removing weeds.
5. Rake		Used before excavating the top clear the leaves, and dust on the surface.
6. Pick Axe		Used for breaking up hard ground or rock.
7. Mattock		Used for digging, prying, and chopping.
8. Digging Bars		Used for breaking up clay, concrete, frozen ground, and other hard materials, moving or breaking up tree roots and obstacles, and making holes in the ground for fence posts.

* MachineryTool

Names	Images	Uses
9. Tracked Excavator		Used for digging, material handling, demolition, and open-pit mining.
10. Wheeled Excavator		Used for scrapyard work, road work, material handling, waste handling
11. Back Hoe Excavator		Used for light transportation of building material, construction, small demolitions, excavation, etc.
12. Bulldozer		Used for shallow digging and ditching.
13. Dragline Excavators		Used for road, port construction, pond, and canal dredging, and as pile driving rigs.
14. Trenchers		Used to dig trenches, especially for laying pipes or electrical cables, for installing drainage, or in preparation for trench warfare.
15. Tractor		Used to carry good, digging ground.

b. Water Supplying Tools

Names	Images	Uses
15. Copper Tube Cutter		Used to cut pipe.
16. Water Pump Pliers		Used to cut thick metal.
17. Air Testing U Gauge Kit		Used to test drains and sewers in accordance with Building Regulations.
18. Solder Capillary Lead-Free Wire		Used to produce perfect joints quickly and effectively.
19. PVC Pipe Cement		Used for an airtight, leak-proof bond.
20. Pipe Sealing Cord		Used for sealing pipe threads, lubricating threaded connections, and preventing seizing during disassembly.

21. PTFE Tape		Used for sealing pipe threads.
22. Super Fire 2 Torch		Used for soldering and brazing.
23. Plastic Pipe Cutter		Used for cutting plastic pipes.
24. Flux Brush		Used in pipe connections that are joined together by soldering.
25. Silicone Lubricant Grease		Used to prevent corrosion on valve stems, faucets, ballcock linkages, etc.
26. Drain Test Plug		Used to stop pipes and to carry out low-pressure testing on many types of pipes.
27. Hacksaw		Used for cutting thin metal such as aluminum, brass, steel, or copper.
28. Pliers		Used for gripping.
29. Pipe wrench		Used on threaded pipe, usually galvanized steel, black iron, or similar metal pipes.
30. Snake Machine		Used to dislodge clogs in plumbing.

31. Borescope		Used to non-destructively inspect industrial systems and equipment for condition, manufactured parts for quality and security, and law enforcement for contraband, intelligence, and safety.
32. Crimpers		Used to make cold weld joints between wires and a connector by deforming one or both of them to hold the other.
33. Gloves		Used to protect and comfort hands against cold or heat, damage by friction, abrasion or chemicals, and disease
34. Faucet Key		Used to open tamper-resistant hose bibs which are usually located on the exterior of commercial and industrial buildings, as well as rest stops.
35. Plungers		Used to clear blockages in drains and pipes.
36. Hand Auger		Used to carry out a range of shallow digging necessary in obtaining soil samples, making postholes, etc.
37. Goggles		Used to shield the eyes against liquid or chemical splash, irritating mists.
38. Heat Shields/Pads		Used to protect objects from overheating.
39. Stubby screwdriver		Used to facilitate access to screws located in areas that cannot be reached easily by a regular screwdriver.
40. Drain Auger		Used for removing clogs and obstructions from a drain.

41. Adjustable 2 Jaw Basin Wrench		Used in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
42. Adjustable Wrench Extra Wide Jaws		Used for drain trap that is often used in kitchen and bathroom floor drain.
43. Replacement Radiator Bracket		Used to securely fix your existing radiators to the floor or wall.
44. Standard U-Gauge Manometer		Used to measure the pressure that the difference in column heights is also a common unit.
45. Universal Drain Clearing Rod Set		Used to clean and remove obstructions from most domestic 100mm (4in) underground drainage pipes.
46.  Contract Air Duster		Used to provide a pressurized blast, knocking loose dust and dirt.
47. High-Pressure Propane Regulator		Used for blown-air heaters, grain drying, blowtorches, furnaces, outdoor catering, and other uses.
48. Abrasive Mini Strips		Used for roughing up, deburring, and removing paint and oxides from copper pipe and fittings prior to soldering.
49. Butane Propane Gas Cartridge		Used as a fuel in heating, cooling, hot water, vehicles, refrigerants, and much more.
50. Water flowmeters		Used to measure the volume of water used in commercial and residential buildings.

51. Pipe		Used to supply water to the field.
52. Sprinkler		Used to irrigate, or provide water, to plants.

This was our 50+ Irrigation Tools List.