12 Safety Tips For Building Construction

- Advertisement -
- Advertisement -

In this article, we will discuss safety tips for building construction.


  1. Introduction  

Safety measures should be carried out in any of the construction sites. One small mistake is enough to occur an accident on the construction site. An accident can take a life of a worker on the construction site. So, to be safe while working on construction sites it is very necessary to adopt all the preventive measures that can avoid accidents on construction sites.

If any accident happens then there should be a facility of first aid as it can save the life of a person. There are a few safety tips that can help you to avoid accidents on construction sites. So, before starting a work always remember below mentioned safety tips for building construction.


  2. Safety Tips for Building Construction  

Here are 12 safety tips for building construction sites are as follows: 


  1. Providing Proper Training  

You need to know all the risk factors before starting work that can make you aware of that particular situation. You should be well trained before doing any particular work. Your training should include these factors:

i. Getting safety training classes

ii. Getting full training related to types of equipment (How does it work?)

iii. Inspecting the equipment and checking their part are well functioning or not.

iv. Emergency and first-aid plans.


Providing Proper Training


  2. Wear the Safety Equipment  

Safety equipment should be provided for all workers and also for visitors. In the place where the noise is high, earplugs should be used to protect ears from sharp sound. The respiratory equipment should be utilized to protect the nose from dust particles. Don’t forget to wear hand gloves and boots while working with concrete.


Safety Tips in Building Construction


  3. Always Place Scaffolding on Rough Surfaces  

While preparing the scaffolding make sure that it can carry the load of worker and material kept on it. Make 2-3 thread ties by different thread or use a steel platform that is safer than that bamboo.


Always Place Scaffolding on Rough Surfaces


  4. Create Separate Work Areas  

By creating separate work areas, don’t let to enter any unauthorized person inside the work areas.


Safety Tips in Building Construction


  4. Wear Harness While Working in High Location  

It is very important to wear a harness while working in a high location. It can save your life. It will protect you from falling down to the ground which can avoid a big accident on site.


Wear Harness While Working in High Location


  5. Increase Worker and Work Site Visibility  

For making the site more visible spreading water on the ground surface wouldn’t make the air smoky. Don’t spread more water as the ground surface can be slippery. An increase in workers can reduce the load of work from workers.


safety tips for building construction


Read Also: Safety Equipment and Tools in Construction



  6. Check electrical appliances and wires daily  

The make a proper path for wire as sometimes it may be dangerous, the worker may get stuck and fell down that might occur an accident. The wire should be inspected daily, the wire where it is naked should be immediately get taped.

Check electrical appliances and wires daily


  7. Use Caution When Operating Heavy Machinery  

While working with machinery vehicles, more awareness should be shown. Here are a few things that need to be followed by an operator:

a. Utilize a seatbelt at all times

b. Apply parking brakes whenever vehicles are not in use

c. Put a block in front or behind the tires when left on an incline or declined.

d. Use a spotter when moving, unloading, and loading equipment

e. Check that mirrors and other visual aids like tail lights are attached and operational.

safety tips for building construction


  8. Keeping a Competent Person  

A competent person is a person who watches all the worker and make sure their safety. All the possible hazards are considered by a competent person.

Keeping a Competent Person


  9. Aware of Surrounding  

While working you should be aware of your surroundings, what is going on in your surrounding. While carrying a load, don’t be too quick.

Aware of Surrounding


  10. Always Stay Hydrated  

While working in the hot sun, usually people get faint due to lack of water in their bodies. So, the competent person should keep his to the individual worker.

Always Stay Hydrated


  11. Always Communicate With Each Other  

There should be a good mutual understanding between workers. There should be a discussion of work and the plan should be executed according to the decision taken.

Always Communicate With Each Other


  12. If in doubt, ask  

If there doubt related to work, equipment is good to ask with experienced manpower. Because they can guide you to operate or run the equipment. So, it is always good to ask whenever there is a doubt.

safety tips for building construction

These were our 12 safety tips for building construction sites.


Read Also: Road Construction Safety Tips


- Advertisement -
Latest Articles

[newsletter_signup_form id=1]

Related Articles