Crown Molding : Ideas, Installation, Types & FAQ of Crown Molding

Crown molding may be defined as an architectural component that is employed to improve the aesthetic beauty of a space by providing a decorative transition between the wall and the ceiling.

It can be employed to protect defects or to make a focal point in a building. Crown molding is available in a combination of styles, materials, and sizes, creating it easy to discover one that suits your individual preference and the design of your building.

  1. Crown Molding  

There are many types of crown molding obtainable, each with special characteristics and design elements.

Some of the most familiar types of crown molding possess standard crown molding, dentil crown molding, cove crown molding, and rope crown molding.

Each of these types of crown molding has unlike style and design, permitting one to select the best one that serves the requirements and priorities of the user.

  2. Crown Molding Ideas  

  3. Crown Molding Installation  

a. Tools Required

i. Air compressor

ii. Air hose

iii. Brad nail gun

iv. Coping saw

v. Level

vi. Miter saw

vii. Rasp

viii. Tape measure

ix. Utility knife

b. Materials Required

i. Masking tape

b. Installation

i. Experiment with Different Molding Profiles

ii. Sketch and Measure

iii. Shop for Crown Molding Carefully

iv. Apply Masking Tape to Walls

v. Start with the Long Wall and Work in One Direction

vi. Test the Miter Angle

vii. Install the Ceiling Rails

viii. Install the Wall Rails

ix. Make a Marking Gauge for the Crown

x. Mark the Rails

xi. Take Accurate Measurements

xii. Begin the Crown Molding Installation

xiii. Set Up Your Miter Saw

xiv. Cut a 45-degree Angle

xv. Cope the Molding

xvi. Test-Fit the Molding

xvii. Check the Fit

xviii. Guide the Molding into Place

xix. Mark Outside Corner Pieces

xx. Cut Outside Corner Miters

xxi. Check the Fit

xxii. Make Small Cracks Disappear

xxiii. Use “Scarf” Joints on Long Walls

xxiv. Finish Touches

  4. Types of Crown Molding  

The types of crown molding are as follows:

a. Cove Molding

cove molding is an uncomplicated, concave-shaped frame that is utilized where ceilings and walls merge. The distinguishing shape of the cove molding creates it differently.

At the junction of the risers and treads of the stairway, it is even positioned. Basically, a cove can be occasionally regarded as an easier type of crown.

Cove molding is an inexpensive selection for redesigning interiors. Cove molds conceal defects and enhance the entire aesthetic impression. The cove style is a great option for rooms that aren’t very stylish.

b. Dentil Crown Molding

The dentil molding is an aesthetic quality that is made of smaller, evenly gaped blocks in a duplicative pattern.

Dentil molding is a decorative layout created of blocks that resemble teeth that possess sources in Greek architecture. It stood typically made into the crown molding.

In old houses, particularly Victorian ones, dentil can be noticed both indoors around doorways and ceilings as well as out along rooflines.

Dentil is very pricey to use just because it needs a lot of manpower for installation and is additionally costly to construct. Each block must be correctly trimmed, calculated, as well as placed individually.

c. Batten Crown Molding

Batten is also known as board-and-batten. The style of molding which varies with wall paneling is called board and batten.

The batten molding is a rectangular-shaped finish developed to protect the opening between two wall panels. The standard gapping would be 1-2 feet, as well as it can be employed either vertically or horizontally.

Batten molding is a simple, low-cost solution to complete and change rooms. It has increased in popularity among farmhouse and cottage decor fans.

d. Casing Crown Molding

The casing is a frame that is positioned on door or window frameworks to cover wall voids. The space can be altered hugely by employing crown molding, and also more detailed patterns can also imply a transformation in the room’s view.

The Casing enhances the aesthetic of doors and windows by encircling them in a smoothly continued finish which may be changed to spotlight the space style.

The common casings in these locations are 2 to 3 inches broad, although deeper patterns are feasible to deliver a beautiful shelf.

e. Wainscoting Crown Molding

To protect a minimum of 3 to 4 feet of walls, wainscoting is a modern molding that can be established between the chair rail and baseboard.

Wainscoting offers walls both deepness & beauty by preparing them with expanded decorative elements.

Despite wainscoting is not extremely popular, it can bring uniqueness to a room. It is considered one of the most accessible trim molding styles, having a wide range of styles to choose from.

f. Egg and Dart Crown Molding

Egg and dart patterns are fairly standard for moldings, but it is also widely employed for exterior architecture as well as outdoor constructions.

Egg and dart molding is generally employed in designs that even contain chair rails or crown molding.

The mold has additional V-darts with oval-shaped eggs, whether piece or whole, that are provided by the ancient Greek class. Ancient Greece is where the egg and dart patterns were initially created.

g. Bead and Pearl Crown Molding

The bead and pearl moldings are identical styles that can be noticed in a broad range of home fittings, such as trim and stair railings.

They are constructed up of rows with symmetrical spherical patterns. These moldings can contain inconsistent portions of detail.

The beads usually assume the shape of items that contain leaves, spindles, or darts. The crown molding and chair rails are generally decorated with bead and pearl patterns.

h. Chair Rail Crown Molding

The chair rail is a type of frame that covers walls from chairs contacting it while also being aesthetically pleasing, commonly in a dining room. Chair rails are typically employed for decoration.

They deliver charm and warmth to the room while controlling the walls from scratches and damage. In order to transition between two different types of wall surfaces, it can also be employed only for aesthetic purposes.

The famous design approach is to paint one side of the both chair rail and wallpaper on the other side. For a more special effect, you may employ various paint colors, wallpaper designs, or wall paneling for the amount of a wall that is below the chair rail.

i. Baseboard Crown Molding

In most of the buildings, baseboard molding is very familiar. The baseboard is a plain finish that operates down the base of the wall, just above the floor. It is employed to deliver an attractive and protective border. In contrast to crown molding, the straightforward baseboard is even a very famous style of frame.

It can be simple or decorated whenever blended with a quarter round or various types of frame. Baseboards are usually more delicate, compared to casings. Integrating the two will outcome in a smooth impression. Confirm that the type of your baseboards corresponds and does not clash with the crown molding or decor overhead.

j. Picture Rail Crown Molding

The picture rail’s function is similar to that of a chair rail. You can hold paintings from it without damaging your walls because your screw is into the molding instead of the wall as they are placed a foot or two just below the ceiling. The picture rails are a style of molding that is positioned horizontally.

Additionally, it could be utilized to clarify a central focus on a wall or to provide a detailed and ornate framework for canvases. The picture rail has grown into a distinct decorative component throughout time.

  5. FAQ  

i. How to cut crown molding inside corners?

To cut crown molding inside corners follow these steps:

a. Take 10-15 minutes mitering corners to make plan

b. Employ an angle finder to select the angle of corner

c. Calculate the wall and mark the corner you’re proceeding to trim

d. Arrange the table of miter saw to trim at a 90-degree angle

e. Adjust your blade to cut at an angle based on your wall’s angle

f. Clamp your crown molding in place under the miter saw.

g. Lower the saw to create a beveled trim at the preferred angle.

ii. What do you mean by Crown Molding?

It may be defined as an architectural component that is employed to improve the aesthetic beauty of a space by providing a decorative transition between the wall and the ceiling.

Read More: Concrete Repair Chemicals