Types of Integral Bridges

Types of Integral Bridges

An integral bridge may be defined as the bridge without any joints. Precisely, an integral bridge is the type of bridge that does not have any joint between spans or between spans and abutments. On account of this, the integral bridge does not essentially consist of an expansion joint to accommodate the enlargements due to temperature increase. There are 4 types of integral bridges which are explained below.

End screen abutments min

An example of an integral bridge is the typical masonry arch bridge. Since such a bridge does not have any joint, the deflections or movement due to subsequent expansion or contraction as well as braking load is accounted by the end walls of the abutment. The history of integral bridges dates back to 1959 in the United Kingdom.

 

 

IMPORTANCE OF INTEGRAL BRIDGES

Some of the main importance of the integral bridge can be listed as follows:

1. Integral bridge greatly reduces maintenance needs than a conventional bridge.

2. Such bridge offers greater durability than other jointed bridges.

3. The integral bridge can serve as an economical highway bridge in the long run.

 

 

TYPES OF INTEGRAL BRIDGES

Based on the types of the abutment, integral bridges can be categorized into the following:

 

i. Integral Bridge with Frame Abutment

Integral bridge with frame abutment is similar to a portal frame structure. It may be defined as the type of integral bridge in which the axial forces, shear forces and moments are transferred directly from the deck of the bridge to the supporting structure. The backfill is also retained by the frames of abutment similar to the retaining wall. In this bridge, embedded wall footing and spread footing is preferred as the foundation.

During subsequent thermal expansion or contraction, the beams on the deck react. The reaction results in a horizontal displacement. Thus, the abutments must be constructed with some flexibility to prevent the displacement on foundations. Due to this reason, stiff reinforced concrete abutment must not be used. Instead, sheet piles may be used as a foundation.

 

ii. Integral Bridge with Bank Pad Abutment

Integral bridge with bank pad abutment is similar to the stiff portal type construction. This type of bridge consists of the end supports that are fully integrated with the deck beams. During thermal expansion or contraction, these supports can freely slide and can freely rotate due to the bending moment from the deck beams. Such type of movements i.e. sliding and rotation can considerably affect the bearing capacity of the soil underneath.

Thus, to account for this, the serviceability limit states are kept lower than the normal static values. The backfill is filled behind the end screen wall formed by the bank pad abutment. It must be noted that the width of the end screen wall must be kept the same as that of the pavement constructed above it.

Integral bank pad abutmentBank pad abutments 450x280 765x510 min

 

 

iii. Integral Bridge with Flexible Support Abutment

Integral bridge with flexible support abutment is constructed with piles as the foundation. Generally, post holes are created around the pile and up to the depth of the pile. The reason for creating the hole is to allow the space for the movement of the pile due to thermal expansion or contraction.

Hence, the hole must provide sufficient space for the horizontal pile movement eliminating the soil-foundation interaction. Such a hole is commonly constructed using precast concrete rings for larger size pipes and polythene for smaller size pipes. The pipes must be essentially checked for buckling from time to time. For this purpose, a duct for inspection is created in the hole.

Integral Bridges

 

 

iv. Integral Bridge with Semi-Integral End Screen Abutment

It consists of deck beams and the end screen walls integral with each other. However, the end screen walls, in this case, do not provide support to the deck beams. An arrangement of bearings is provided to resist the horizontal displacement. In such bridge, the support is constructed separately eliminating soil-
substructure interaction.

ss min

 

 

 

ADVANTAGES OF INTEGRAL BRIDGES

Some of the advantages of integral bridges can be listed as follows:

1. The integral bridge is cheaper in comparison to the conventional bridges. The maintenance cost is also relatively less.

2. The construction process of such bridge is simple as well as rapid.

3. The absence of expansion joints makes the surface smoother enhancing the riding quality.

4. When an integral bridge is constructed in place of an old bridge, the same foundation may be used. Thus, the cost of construction can be greatly reduced.

5. The drainage system may be easily provided behind the integral abutments thereby preventing leakage.

 

 

 

DISADVANTAGES OF INTEGRAL BRIDGE

Some of the disadvantages of integral bridges can be listed as follows:

1. It is not suitable in areas with temperature fluctuations or variations greater than 51mm.

2. When the pile foundation is used, there is a high possibility of formation of plastic hinges under high stresses of expansion and contraction.

3. This bridge is not suitable in regions where the subsoil is weak.

4. The span of the integral bridge is limited. In case of steel girder integral bridges, the length is limited to 40m and up to 50m for concrete girder bridges.

 

 

Leave a Reply